{{ $t('shop.all.spaetbestellservice.hinweis') }}
Valve function | 5/3 closed |
Actuation type | Electrical |
Valve size [mm] | 18 |
Normal nominal flow [l/min] | 450 |
Operating pressure [bar] | -0.9 to 10 |
Construction set up | Piston pusher |
Reset mode | Mechanical spring |
Protection category |
IP65, NEMA 4 |
Nominal width [mm] | 5 |
Exhaust function | Can be throttled |
Sealing principle | Soft |
installation position | arbitrary |
Complies to standard |
ISO 15407-1, VDMA 24563 |
Hand assist actuation | tentative |
Control type | pilot operated |
Control air supply | external |
Flow direction | Reversible |
Überdeckung | positive Überdeckung |
Signal condition display | LED |
Flow valve [l/min] | 650 |
Flow valve single connection plate [l/min] | 500 |
Flow valve pneumatically linked [l/min] | 450 |
Shifting time off [ms] | 30 |
Shifting time on [ms] | 18 |
Power-on time | 100 % |
Coil characteristic value | 24 V AC: 50/60 Hz, pull-in power 3.1 VA, holding power 2.3 VA |
Permitted voltage oscillations | -15 % / +10 % |
Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
Information about operating and control medium | Oiled operation possible (required in further operations) |
Oscillation strength | Transport use test with severity level 2 to FN 942017-4 and EN 60068-2-6 |
Shock resistance | Shock test with degree of severity 2 to FN 942017-5 and EN 60068-2-27 |
Corrosion resistant class KBK | 0 - No corrosion stressing |
Medium temperature [°C] | -5 to 50 |
Relative humidity | 0 - 90 % |
Sound pressure level [dB(A)] | 85 |
control medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
ambient temperature [°C] | -5 to 50 |
Max. tightening torque Valve fastening [Nm] | 1 |
Product weight [g] | 174 |
Electrical connection |
Wiring diagram Form C acc. to EN 175301-803, acc. to DIN EN 175301-803, without protective earthing conductor |
Fastening type | on connection plate |
Support air control connection 12 | Connection plate Size 18 mm to ISO 15407-1 |
Support air control connection 14 | Connection plate Size 18 mm to ISO 15407-1 |
Exhaust control connection 82/84 |
Recorded, Not recorded to standard |
Pneumatic connection 1 | Connection plate Size 18 mm to ISO 15407-1 |
Pneumatic connection 2 | Connection plate Size 18 mm to ISO 15407-1 |
Pneumatic connection 3 | Connection plate Size 18 mm to ISO 15407-1 |
Pneumatic connection 4 | Connection plate Size 18 mm to ISO 15407-1 |
Pneumatic connection 5 | Connection plate Size 18 mm to ISO 15407-1 |
Pre-control interface | acc. to ISO 15218 |
Material information | RoHs compliant |
Seals material |
HNBR, NBR |
Housing material | Aluminium die casting |
Screws material | Zinc plated steel |
Shifting time um [ms] | 20 |
Control pressure [bar] | 3 to 10 |
{{ $t('shop.all.gewicht') }} | 174 g / pcs |
{{ $t('shop.display.artikel.zollwarennummer') }} | 84812090 |
{{ $t('shop.all.hersteller') }} | Festo |
{{ $t('shop.all.spaetbestellservice.hinweis') }}
{{ $t('shop.all.wochenendversand.hinweis') }}
An error has occurred, please reload this page and try again.